Wall Mount Rack

WM-DS Series  Wall Mount Rack for small Networking, AV, Telecom & lab application. Racks manufactured out of steel sheet punched, formed, welded and Powder coated with highest quality standards under stringent ISO 9001-2008 Manufacturing & Quality management system to ensure highest quality product.NetRack Enclosures is a leading worldwide manufactures, providing best quality of network components like Wall Mount Racks, Wall Mount Server Racks.

  The rack unit size is based on a standard rack specification as defined in EIA-310. The rack unit is also specified as the unit of height in the Eurocard standard, Wall Mount Racks also defines a similar unit, horizontal pitch (HP), used to measure the width of rack mounted equipment.

Do note that the mounting hole distance (as shown to the right) is different for 19" racks and 23" racks: The 19" racks uses odd spacings (as shown to the right) while the 23" racks uses evenly spaced mounting holes.

A front panel or filler panel in a rack is not an exact multiple of 1.75 inches (44.45 mm). To allow space between adjacent rack-mounted components, a panel is ¹⁄₃₂inch (0.031 inch or 0.79 mm) less in height than the full number of rack units would imply.

Standard for Racks configuration will be welded frame integrated with side panel and Wall Mount Rack Manufacturers vented top cover with fan mounting provision, Associated Front Glass Door with lock & Key. Front Section will be hinged to Back section with high quality hinges. Back section will have wall mounting provision. Front & Back section can be locked with lock & Key available from 6RU to 15RU Variants